Kyocera CNMG190612PH CA530 TAD01096
For your absolute peace of mind, all transactions are processed through and secured by PayPal. Your purchase is fully covered by PayPal Buyer Protection, ensuring secure data encryption and trusted dispute resolution.
安心の決済保護：すべてのお手続きはPayPalを介して安全に暗号化され、バイヤープロテクション（購入者保護）が適用されます。
- Stock: In Stock
- Model: CA530
- Manufactured: In Japan
- Ships: Worldwide
- Item Code: TAD01096
Flat $50 USD Shipping worldwide via DHL Express. Maximize your savings by ordering in bulk packs!
International Shipping Note
Please note that any local customs duties, taxes, or import fees are not included in the checkout price and must be borne by the customer.
How it works: Once your package arrives at your country's customs office, DHL will contact you directly via email, SMS, or phone to guide you through the local clearance and payment process.
DHL secure global delivery. Tracked from our door to yours. Kyotow.com Secured
1. Product Overview
The Kyocera CNMG190612PH CA530 TAD01096 is a precision indexable turning insert engineered by Kyocera in Japan for CNC lathe production. Built around a Rhombic 80° geometry with a 80° corner angle, 19.3 mm cutting edge length and 19.05 mm inscribed circle, 6.35 mm thickness and a 1.2 mm nose radius, the CNMG190612PH is designed for general external turning & facing; strong corner for roughing and finishing. The 0° (negative) clearance keeps cutting forces controlled while the M-class tolerance (sintered/molded general class; most common for general machining) guarantees repeatable indexing accuracy.
Grade CA530 is a Kyocera CVD grade featuring CVD TiCN+Al2O3+TiN. It reaches HV 3,200 (surface) surface hardness with a transverse rupture strength of 3,150 MPa, and remains oxidation-stable up to 1,200°C. Within its P15–P30 / K15–K30 ISO application window it is engineered for general steel & cast iron turning; proven reliability. Primary workpiece groups: Carbon Steel, Alloy Steel, Cast Iron.
Chip control comes from the PH chipbreaker — heavy roughing steel. Its working window covers the roughing application zone with high cutting force, and paired with the r = 1.2 mm nose radius it produces controlled, evacuable chips from fn ≈ 0.3 up to 1.2 mm/rev.
In a typical setup on S45C carbon steel, run the CNMG190612PH at Vc 224–322 m/min, feed fn 0.14–0.31 mm/rev and depth of cut ap 1.0–3.5 mm, achieving theoretical surface finishes down to Ra 2.0 µm at the lower feed bound. Every insert is 100% dimensionally and edge-inspected under Kyocera's ISO 9001:2015 system and ships in lot-coded packaging with full batch traceability.
2. Engineering Quick Reference
| Parameter | Specification |
|---|---|
| Full Product Name | Kyocera CNMG190612PH CA530 TAD01096 |
| ISO Ordering Code | CNMG190612PH |
| Grade | CA530 |
| Insert Shape | Rhombic 80° (80°) |
| Cutting Edge Length | 19.3 mm |
| Inscribed Circle | 19.05 mm |
| Thickness | 6.35 mm |
| Nose Radius | 1.2 mm |
| Chipbreaker | PH |
| MPN | TAD01096 |
3. ISO 1832 Designation — Complete Breakdown
| ISO 1832 Position | Code | Decoded Meaning |
|---|---|---|
| Position 1 — Insert Shape | C | Rhombic 80° (80° corner) |
| Position 2 — Clearance Angle | N | 0° (negative) |
| Position 3 — Tolerance Class | M | Sintered/molded general class; most common for general machining — I.C. ±0.05–0.15 (size dep.), thickness ±0.08–0.18 |
| Position 4 — Fixing / Hole | G | With cylindrical hole, double-sided — screw-clamp mounting; usable both sides |
| Position 5 — Edge Length Code | 19 | 19.3 mm (I.C. 19.05 mm) |
| Position 6 — Thickness Code | 06 | 6.35 mm |
| Position 7 — Nose Radius Code | 12 | 1.2 mm |
| Suffix — Chipbreaker | PH | heavy roughing steel |
4. Insert Geometry & Engineering Dimensions
| Parameter | Specification |
|---|---|
| Insert Shape | Rhombic 80° (80°) |
| Cutting Edge Length | 19.3 mm |
| Inscribed Circle (I.C.) | 19.05 mm |
| Insert Thickness | 6.35 mm |
| Nose Radius | 1.2 mm |
| Clearance Angle | 0° (negative) |
| Usable Cutting Edges | 2 per face |
| Edge Strength Rating | Very Good |
| Fixing | With cylindrical hole, double-sided — screw-clamp mounting; usable both sides |
| Geometry Tolerance | I.C. ±0.05–0.15 (size dep.), thickness ±0.08–0.18 |
5. Grade Technology — Substrate & Coating
| Parameter | Specification |
|---|---|
| Grade Designation | CA530 |
| Grade Family | CVD |
| Coating System | CVD TiCN+Al2O3+TiN |
| Surface Hardness | HV 3,200 (surface) |
| Transverse Rupture Strength | 3,150 MPa |
| Oxidation / Heat Resistance | 1,200°C |
| ISO Application Range | P15–P30 / K15–K30 |
| Primary Materials | Carbon Steel, Alloy Steel, Cast Iron |
Primary application: General steel & cast iron turning; proven reliability.
6. Grade Application Range by ISO Material Group
| ISO Group | Suitability | Note |
|---|---|---|
| P – Steel | Excellent | First-choice application group |
| M – Stainless Steel | Not Recommended | Outside grade application window |
| K – Cast Iron | Very Good | Fully supported application group |
| N – Non-Ferrous | Not Recommended | Outside grade application window |
| S – HRSA / Titanium | Not Recommended | Outside grade application window |
| H – Hardened Steel | Not Recommended | Outside grade application window |
7. Chipbreaker Geometry & Working Window
PH geometry: heavy roughing steel Application zone: Roughing; cutting-force level: High.
| Application Zone | Feed fn (mm/rev) | Depth of Cut ap (mm) |
|---|---|---|
| Finishing | 0.05–0.3 | 0.10–1.2 |
| Medium cutting | 0.3–0.72 | 1.2–3.6 |
| Roughing | 0.72–1.2 | 3.6–7.2 |
8. Depth-of-Cut Guide
| Cut Type | Recommended ap Range | Limiting Factor |
|---|---|---|
| Finishing | 0.05–1.2 mm | Surface finish / vibration |
| Medium | 1.2–3.6 mm | Chipbreaker working range |
| Roughing (max) | up to 7.2 mm (≈ 0.6 × 19.3 mm edge) | Edge length & machine power |
9. Recommended Workpiece Materials
Optimized for: Carbon Steel, Alloy Steel, Cast Iron. Typical hardness window HB 150–300 for steels; see the cutting-condition tables for per-material parameters.
10. Application Capability Map
| Operation | Rating | Notes |
|---|---|---|
| External Turning (longitudinal) | Excellent | Primary operation |
| Facing | Excellent | Full facing capability |
| Profiling / Copy Turning | Good | Rhombic 80° corner access |
| Interrupted Cut | Fair | Reduce feed 20–30% |
| Internal Boring (matching bar) | Good | Positive geometry preferred |
11. Recommended Cutting Conditions — by Workpiece Material
| Workpiece Material | Vc (m/min) | fn (mm/rev) | ap (mm) | Coolant |
|---|---|---|---|---|
| Carbon Steel (S45C/C45, HB 180) | 224–322 | 0.14–0.31 | 1.0–3.5 | Wet (emulsion 6–10%) |
| Alloy Steel (SCM440/4140, HB 280) | 224–322 | 0.14–0.31 | 1.0–3.5 | Wet (emulsion 6–10%) |
| Stainless Steel (SUS304/1.4301) | 144–206 | 0.11–0.25 | 0.8–2.8 | Wet (emulsion 6–10%) |
| Gray Cast Iron (FC250/GG25) | 200–287 | 0.15–0.35 | 1.2–4.2 | Dry / MQL |
| Nodular Cast Iron (FCD450) | 200–287 | 0.15–0.35 | 1.2–4.2 | Dry / MQL |
12. Cutting Conditions — by Operation Type
| Operation | Vc factor | Feed fn (mm/rev) | DoC ap (mm) | Expected Surface Ra (µm) |
|---|---|---|---|---|
| Finishing | × 1.15 of table value | 0.05–0.42 | 0.05–1 | 0.3–18.4 |
| Medium | × 1.00 | 0.42–0.84 | 1–3 | 18.4–73.5 |
| Roughing | × 0.80–0.90 | 0.84–1.32 | 3–6 | 73.5–181.5 |
Programming note: Values assume a rigid setup with tool overhang ≤ 4× shank diameter and continuous cut. For interrupted cuts reduce feed 20–30% and Vc 10%.
13. Edge Preparation & Wear Limits
| Wear Criterion | Limit | Action |
|---|---|---|
| Flank wear VB | 0.30 mm (finishing) / 0.50 mm (roughing) | Index to fresh corner |
| Crater depth KT | 0.10 mm | Reduce Vc 10–15% or improve coolant |
| Notch wear at DoC line | Visible notch | Vary DoC between passes; reduce Vc |
| Built-up edge | Any BUE on rake | Increase Vc; check coolant concentration |
| Chipping / plastic deformation | Edge micro-fracture or deformed nose | Reduce feed/Vc; verify rigidity; tougher grade |
14. Compatible Toolholders
ISO holders for 80° rhombic inserts. Always match the insert seat size to the holder designation.
| Compatible Holder Family | Seat Size | Mounting |
|---|---|---|
| MCLNR/L | Seat size 19 | External / Internal |
| PCLNR/L | Seat size 19 | External / Internal |
| DCLNR/L | Seat size 19 | External / Internal |
| SCLCR/L (positive boring) | Seat size 19 | External / Internal |
15. Operating & Handling Guidelines
- Clean the holder seat thoroughly before mounting; any chip or burr under the insert causes edge breakage
- Tighten the clamping screw to 2.0–4.0 Nm (size-dependent) with a torque wrench — never over-tighten
- Check insert seating runout ≤ 0.02 mm TIR before the first cut
- Run-in new edges at 80% Vc for the first 2–3 minutes of cut
- Index at the wear limits — do not run to catastrophic failure
- Apply coolant continuously; on/off coolant cycling causes thermal cracks
16. Quality Assurance & Manufacturing
| Quality Attribute | Specification |
|---|---|
| Manufacturing Standard | ISO 9001:2015 certified Kyocera production, Japan |
| Dimensional Inspection | 100% inspection with CMM-class tolerance control |
| Edge Inspection | Microscopic cutting-edge inspection on every piece |
| Traceability | Laser-marked lot code on packaging; full batch traceability |
| Country of Origin | Japan |
17. Packaging & Ordering Information
| Parameter | Specification |
|---|---|
| Manufacturer Part Number | TAD01096 |
| Ordering Code | CNMG190612PH |
| Standard Packaging | 10 inserts per box (plastic case with individual pockets) |
| Minimum Order Quantity | 1 box (10 pcs) |
| Stock Status | In stock — ships within 1–3 business days |
| Warranty | 90-day manufacturing-defect warranty |
18. Catalog Meta Data
| Parameter | Specification |
|---|---|
| Brand | Kyocera |
| Product Type | Indexable Turning Insert |
| Full Product Name | Kyocera CNMG190612PH CA530 TAD01096 |
| ISO Code | CNMG190612PH |
| Shape | Rhombic 80° |
| Grade | CA530 |
| Nose Radius | 1.2 mm |
| Chipbreaker | PH |
| MPN | TAD01096 |
| Origin | Japan |
19. Frequently Asked Questions
Q: What materials can the CNMG190612PH in grade CA530 machine?
A: Grade CA530 covers ISO P15–P30 / K15–K30: Carbon Steel, Alloy Steel, Cast Iron.
Q: What feed should I start with on the CNMG190612PH?
A: Start at fn ≈ 0.42 mm/rev — inside the PH chipbreaker window — and adjust toward 0.84 mm/rev for medium cutting with the r = 1.2 mm nose radius.
Q: Which toolholder fits the CNMG190612PH?
A: Any ISO holder with a Rhombic 80° seat in size 19 (e.g., the families listed in Section 14). Match the seat size exactly.
Q: When must I index the CNMG190612PH?
A: Index at VB = 0.30 mm flank wear for finishing or 0.50 mm for roughing — running beyond this risks edge collapse and workpiece damage.
Q: Is the CNMG190612PH suitable for interrupted cuts?
A: Light interruptions only; reduce feed 20–30% and consider a tougher grade for heavy interruptions.
20. Engineering Support
Kyotow.com provides free application-engineering support for this insert: grade selection, cutting-parameter optimization and tool-life troubleshooting. Contact our technical desk with your workpiece material, hardness and machine specification.
Why Buy from Kyotow.com? 100% genuine OEM Kyocera cutting tools sourced through authorized channels. Full manufacturer warranty & batch traceability. Fast worldwide shipping with tracked delivery. Free engineering support for cutting parameter selection, grade choice and application troubleshooting.
✓ Genuine Kyocera Product
| Manufacturer | Kyocera Corporation |
|---|---|
| Status | Verified Original Product |
| Quality Assurance | Guaranteed Genuine Kyocera Components |
発送・在庫情報
We ship worldwide through our strategic global logistics network. Products are dispatched directly from our international distribution facilities to ensure efficient delivery and customs clearance.
-
Stock Enquiries (在庫確認):
Contact our logistics team at sales.kyotow@gmail.com for real-time inventory status and dispatch location information. -
In-Stock Items (在庫あり):
Normally dispatched within 3 business days from the nearest regional warehouse. -
Factory Procurement (取寄せ):
Manufacturing and dispatch typically require 4–5 weeks. Once production begins, cancellations cannot be accommodated. -
Authenticity Guarantee (本物保証):
All products sold by Kyotow are 100% genuine and sourced through authorized Japanese and international distribution channels.
正確な製品情報
Following the Japanese philosophy of Monozukuri (物の作り), we strive to maintain exceptional technical accuracy throughout our product catalog.
- Confirm dimensions, geometry, coating, and grade using the official Kyocera item code.
- Technical datasheets are available upon request.
- For technical clarification contact sales.kyotow@gmail.com.
返品・キャンセルポリシー
-
100% Accuracy Guarantee:
Full refund or replacement will be provided if the verified Kyocera item received differs from the official item code specified in your order confirmation. -
Order Finality:
Due to automated procurement systems connected directly to global factory distribution channels, orders cannot be modified or cancelled once processing has commenced. -
Technical Assistance:
Please verify machine compatibility, insert geometry, coating, and application grade before placing your order.
安全な決済方法
✓ Encrypted Transactions
✓ Global Buyer Protection
✓ Safe International Payments
All international payments are securely processed through PayPal, ensuring maximum transaction security and customer protection.
国際スピード郵便
✓ Full Shipment Tracking
✓ Global Logistics Network
✓ Flat Worldwide Shipping Rate: USD $50
Orders are shipped through our DHL Express corporate account from distribution facilities across Asia, Europe, and China for reliable international delivery.
Need Technical Assistance?
Contact our industrial tooling specialists for application support, tooling recommendations, datasheets, and compatibility verification.
sales.kyotow@gmail.comDirect Supply Chain Transparency サプライチェーンの透明性
Why are our prices so low? (価格が安い理由): Kyotow sources genuine Kyocera tools directly from domestic Japanese distribution networks, completely bypassing the steep regional markups, localized sales overhead, and heavy middleman margins of Western distributors. We pass 100% of those structural savings directly to your machine shop.
Kyotowは日本の国内流通ネットワークから京セラ正規品を直接仕入れることで、欧米の現地代理店による大幅な上乗せ価格や営業コスト、中間マージンを完全に排除しています。その構造的メリットを、お客様の加工現場へ100%還元いたします。
Domestic Sourced
Procured straight from Japan's local wholesale networks to capture maximum market arbitrage.
100% Genuine
Zero counterfeit risk. All items are brand-new, authentic factory-sealed Japanese stock.
No Regional Markups
We bypass Western corporate sales teams and localized regional overhead costs entirely.
