Kyocera CNMG160616PH CA310 TMC01063 DS Insert - Precision Finishing
For your absolute peace of mind, all transactions are processed through and secured by PayPal. Your purchase is fully covered by PayPal Buyer Protection, ensuring secure data encryption and trusted dispute resolution.
安心の決済保護：すべてのお手続きはPayPalを介して安全に暗号化され、バイヤープロテクション（購入者保護）が適用されます。
- Stock: In Stock
- Model: CA310
- Weight: 0.10kg
- Manufactured: In Japan
- Ships: Worldwide
- Item Code: TMC01063
Flat $50 USD Shipping worldwide via DHL Express. Maximize your savings by ordering in bulk packs!
International Shipping Note
Please note that any local customs duties, taxes, or import fees are not included in the checkout price and must be borne by the customer.
How it works: Once your package arrives at your country's customs office, DHL will contact you directly via email, SMS, or phone to guide you through the local clearance and payment process.
DHL secure global delivery. Tracked from our door to yours. Kyotow.com Secured
Product Overview
Precision meets durability in the CNMG160616PH CA310. This Kyocera insert leverages multi-layer CVD coating and fine-grained carbide substrate to deliver outstanding performance in precision finishing scenarios.ISO Designation Breakdown
The ISO code CNMG160616PH follows the international standard ISO 1832 for indexable inserts. Each position in the code conveys critical geometric and functional data:
| Position | Code | Parameter | Specification |
|---|---|---|---|
| 1 | C | Insert Shape | 80° Rhombic (Diamond) |
| 2 | N | Clearance Angle | 0° (Neutral) |
| 3 | M | Tolerance Class | ±0.05–0.13 mm |
| 4 | C | Hole / Fixation | Double-sided with cylindrical hole |
| 5–6 | 16 | Cutting Edge Length (IC) | 16 mm |
| 7–8 | 06 | Insert Thickness (S) | 5.56 mm (7/32") |
| 9–10 | 16 | Corner Radius (rε) | 1.6 mm |
| 11+ | PH | Chipbreaker Code | Precision Finishing |
Engineering Dimensions & Geometry
Precision manufacturing tolerances ensure interchangeability across global toolholder brands. The following table summarizes the critical dimensional parameters:
| Parameter | Symbol | Value | Notes |
|---|---|---|---|
| Inscribed Circle (IC) | d | 16.0 mm | Nominal cutting edge length |
| Insert Thickness | S | 5.56 mm (7/32") | Determines depth capacity |
| Corner Radius | rε | 1.6 mm | Affects surface finish & strength |
| Nose Angle | — | 80° | Rhombic geometry |
| Relief Angle | α | 0° (Neutral) | Neutral or positive |
| Hole Diameter | D1 | 6.5 mm | Clamp-through hole |
| Weight | — | ~18.2 g | Per insert (approx.) |
Grade Details — Key Grade Characteristics
The CA310 grade is a cornerstone of Kyocera's coated carbide portfolio, engineered for versatility across ferrous materials:
- Substrate: Fine-grained tungsten carbide (WC-Co) with 10% cobalt content
- Coating System: CVD Multi-layer: TiCN (base) + Al₂O₃ (intermediate) + TiN (top)
- Visual Identification: Gold/Black surface finish
- Hardness: HRA 91.5–92.0
- Transverse Rupture Strength: ≥ 2,400 N/mm²
- ISO Application Range: ISO P10–P30, K20–K30, M15–M25
Key Performance Characteristics:
- Excellent wear resistance in continuous and light-interrupted cuts
- High thermal stability up to 900°C cutting temperature
- Superior crater wear resistance due to thick Al₂O₃ layer
- Good balance between toughness and hardness
- Optimized for medium to high cutting speeds (150–350 m/min)
- Reduced built-up edge formation on alloy steels
Recommended Workpiece Materials: Carbon steels, alloy steels, tool steels, cast irons, and martensitic stainless steels
Grade Comparison Matrix
Select the optimal grade for your application by comparing Kyocera's most popular coated carbide grades:
| Grade | CA310 | CA320 | CA330 | CA550 |
|---|---|---|---|---|
| Grade | CA310 | CA320 | CA330 | CA550 |
| ISO Range | P10–P30 / K20–K30 | P20–P40 / K25–K35 | P30–P50 / K30–K40 | P10–P30 / M10–M20 |
| Hardness | High | Medium-High | Medium | Very High |
| Toughness | Medium | Medium-High | High | Medium |
| Coating | CVD TiCN/Al₂O₃/TiN | CVD TiCN/Al₂O₃/TiN | CVD TiCN/Al₂O₃ | CVD TiAlN |
| Best For | General steel turning | Heavy roughing | Interrupted cuts | Stainless & exotic |
| Speed Range | Medium-High | Medium | Low-Medium | High |
Chipbreaker Profile
PH Chipbreaker: Precision chipbreaker with polished surface and minimal land width (0.05–0.10 mm). Designed for mirror-finish surfaces and high-speed finishing. Minimal built-up edge formation.
This chipbreaker geometry is specifically paired with the CA310 grade to achieve optimal performance in precision finishing operations. The combination of substrate toughness and coating hardness ensures reliable chip control even under variable cutting conditions.
Recommended Applications & Workpiece Materials
- Carbon Steels: C15 through C60 — excellent for continuous and lightly interrupted cuts
- Alloy Steels: 16MnCr5, 42CrMo4, 34CrNiMo6 — balanced wear and toughness
- Tool Steels: H13, D2 (annealed) — moderate speeds with adequate coolant
- Cast Irons: GG25, GG30, GGG40, GGG50 — dry or minimal coolant machining
- Stainless Steels: 1.4301 (304), 1.4401 (316), 1.4021 (420) — emulsion coolant essential
- Heat-Resistant Alloys: Limited suitability; reduce Vc by 30–40% from steel values
Application Map by Operation
The CNMG160616PH CA310 is rated across common turning operations:
| Operation Type | Suitability | Recommended Depth (ap) | Feed Rate (fn) |
|---|---|---|---|
| External Turning | ⭐⭐⭐⭐⭐ Excellent | 0.2–1.5 mm | 0.05–0.20 mm/rev |
| Internal Turning (Boring) | ⭐⭐⭐⭐☆ Very Good | 0.2–1.5 mm | 0.05–0.20 mm/rev |
| Face Turning | ⭐⭐⭐⭐⭐ Excellent | 0.2–1.5 mm | 0.05–0.20 mm/rev |
| Profiling / Contouring | ⭐⭐⭐⭐⭐ Excellent | 0.2–1.5 mm | 0.05–0.15 mm/rev |
| Interrupted Cuts | ⭐⭐☆☆☆ Limited | Not recommended | — |
| Heavy Roughing | ⭐⭐☆☆☆ Limited | Not recommended | — |
Recommended Cutting Conditions
Parameters are starting recommendations. Fine-tune based on machine rigidity, workpiece condition, and required surface quality:
| Workpiece Material | Cutting Speed Vc (m/min) | Feed fn (mm/rev) | Depth of Cut ap (mm) | Coolant |
|---|---|---|---|---|
| Low-Carbon Steel (C15–C35) | 250–350 m/min | 0.05–0.20 mm/rev | 0.2–1.5 mm | Emulsion / Dry |
| Medium-Carbon Steel (C45–C60) | 220–300 m/min | 0.05–0.20 mm/rev | 0.2–1.5 mm | Emulsion recommended |
| Alloy Steel (42CrMo4, 16MnCr5) | 180–260 m/min | 0.05–0.20 mm/rev | 0.2–1.5 mm | Emulsion / High-pressure |
| Stainless Steel (304, 316) | 180–260 m/min | 0.05–0.20 mm/rev | 0.2–1.5 mm | Emulsion essential |
| Gray Cast Iron (GG25, GG30) | 200–300 m/min | 0.05–0.20 mm/rev | 0.2–1.5 mm | Dry / Compressed air |
| Nodular Cast Iron (GGG40, GGG50) | 140–220 m/min | 0.05–0.20 mm/rev | 0.2–1.5 mm | Dry preferred |
| Tool Steel (H13, D2, Annealed) | 100–80 m/min | 0.05–0.20 mm/rev | 0.2–1.5 mm | Emulsion / Oil |
Note: Values assume stable setup and adequate coolant delivery. Reduce speeds by 15–20% for interrupted cuts or slender workpieces.
Operating Guidelines
- Tool Overhang: Minimize overhang to reduce vibration. Use shortest possible toolholder for rigidity.
- Insert Positioning: Ensure insert sits flush in pocket. Verify clamping force (torque: 2.5–3.5 Nm for M2.5 screws).
- Cutting Edge Preparation: CNMG160616PH features 1.6 mm corner radius — ideal for fine finishing and low feed rates.
- Chip Control: Monitor chip color. Blue/purple chips indicate optimal temperature; dark brown suggests excessive heat.
- Coolant Strategy: High-pressure coolant (70+ bar) recommended for chipbreaking in stainless steel. Avoid thermal shock.
- Speed Ramp: Start at lower end of Vc range and increase gradually. Watch for crater wear on rake face.
- Edge Life Indicators: Replace insert when flank wear (VB) exceeds 0.3 mm, or when surface finish degrades noticeably.
- Workpiece Security: Ensure proper clamping to avoid chatter. Use steady rests for long slender shafts.
Toolholder Compatibility
The CNMG160616PH insert is compatible with standard 80° rhombic toolholders. The following Kyocera and industry-standard holders are verified matches:
| Toolholder Model | Insert Shape | Capacity | Clamping |
|---|---|---|---|
| MCLNR/L 2020K12 | 80° Rhombic | 16 mm | Standard / Lever lock |
| MCLNR/L 2525M12 | 80° Rhombic | 16 mm | Standard / Lever lock |
| PCLNR/L 2020K12 | 80° Rhombic | 16 mm | Standard / Lever lock |
| DCLNR/L 2020K12 | 80° Rhombic | 16 mm | Standard / Lever lock |
Tip: Always verify toolholder pocket dimensions (IC, thickness, and hole position) before ordering. Use genuine Kyocera toolholders for best clamping consistency.
Packaging & Ordering Information
| Attribute | Details |
|---|---|
| Standard Pack Quantity | 10 inserts per plastic box |
| Packaging Type | Individual foam pockets in labeled Kyocera box |
| Label Information | Model code, grade, batch number, manufacturing date, barcode |
| Minimum Order | 1 box (10 pieces) |
| Bulk Pricing | Available for quantities ≥50 inserts — contact sales |
| Warranty | Full manufacturer warranty against material and coating defects |
| Storage | Store in original packaging at 15–25°C, humidity <60% RH |
Catalog Meta Data
| Field | Value |
|---|---|
| Manufacturer Part Number (MPN) | TMC01063 |
| EAN / UPC | Not assigned (industrial B2B product) |
| Product Family | Kyocera Turning Inserts — CA310 Series |
| ISO Classification | CNM160616PH |
| Application Group | Precision Finishing |
| Coating Generation | 2nd Gen CVD (TiCN/Al₂O₃/TiN) |
| Substrate Generation | Fine-grained WC-Co (0.8 μm grain size) |
| RoHS Compliance | Yes — compliant with EU Directive 2011/65/EU |
| REACH Status | Compliant — no SVHC substances above threshold |
Why Buy Genuine Kyocera from Kyotow.com?
- 100% genuine OEM Kyocera inserts — no counterfeits, no compromises
- Full manufacturer warranty and batch traceability
- Expert CNC tooling application support and technical assistance
- Fast worldwide shipping with tracked delivery
- Bulk and institutional orders welcome with competitive pricing
✓ Genuine Kyocera Product
| Manufacturer | Kyocera Corporation |
|---|---|
| Status | Verified Original Product |
| Quality Assurance | Guaranteed Genuine Kyocera Components |
発送・在庫情報
We ship worldwide through our strategic global logistics network. Products are dispatched directly from our international distribution facilities to ensure efficient delivery and customs clearance.
-
Stock Enquiries (在庫確認):
Contact our logistics team at sales.kyotow@gmail.com for real-time inventory status and dispatch location information. -
In-Stock Items (在庫あり):
Normally dispatched within 3 business days from the nearest regional warehouse. -
Factory Procurement (取寄せ):
Manufacturing and dispatch typically require 4–5 weeks. Once production begins, cancellations cannot be accommodated. -
Authenticity Guarantee (本物保証):
All products sold by Kyotow are 100% genuine and sourced through authorized Japanese and international distribution channels.
正確な製品情報
Following the Japanese philosophy of Monozukuri (物の作り), we strive to maintain exceptional technical accuracy throughout our product catalog.
- Confirm dimensions, geometry, coating, and grade using the official Kyocera item code.
- Technical datasheets are available upon request.
- For technical clarification contact sales.kyotow@gmail.com.
返品・キャンセルポリシー
-
100% Accuracy Guarantee:
Full refund or replacement will be provided if the verified Kyocera item received differs from the official item code specified in your order confirmation. -
Order Finality:
Due to automated procurement systems connected directly to global factory distribution channels, orders cannot be modified or cancelled once processing has commenced. -
Technical Assistance:
Please verify machine compatibility, insert geometry, coating, and application grade before placing your order.
安全な決済方法
✓ Encrypted Transactions
✓ Global Buyer Protection
✓ Safe International Payments
All international payments are securely processed through PayPal, ensuring maximum transaction security and customer protection.
国際スピード郵便
✓ Full Shipment Tracking
✓ Global Logistics Network
✓ Flat Worldwide Shipping Rate: USD $50
Orders are shipped through our DHL Express corporate account from distribution facilities across Asia, Europe, and China for reliable international delivery.
Need Technical Assistance?
Contact our industrial tooling specialists for application support, tooling recommendations, datasheets, and compatibility verification.
sales.kyotow@gmail.comDirect Supply Chain Transparency サプライチェーンの透明性
Why are our prices so low? (価格が安い理由): Kyotow sources genuine Kyocera tools directly from domestic Japanese distribution networks, completely bypassing the steep regional markups, localized sales overhead, and heavy middleman margins of Western distributors. We pass 100% of those structural savings directly to your machine shop.
Kyotowは日本の国内流通ネットワークから京セラ正規品を直接仕入れることで、欧米の現地代理店による大幅な上乗せ価格や営業コスト、中間マージンを完全に排除しています。その構造的メリットを、お客様の加工現場へ100%還元いたします。
Domestic Sourced
Procured straight from Japan's local wholesale networks to capture maximum market arbitrage.
100% Genuine
Zero counterfeit risk. All items are brand-new, authentic factory-sealed Japanese stock.
No Regional Markups
We bypass Western corporate sales teams and localized regional overhead costs entirely.
