Kyocera DA1470M-GM PR1535 TLC06336
For your absolute peace of mind, all transactions are processed through and secured by PayPal. Your purchase is fully covered by PayPal Buyer Protection, ensuring secure data encryption and trusted dispute resolution.
安心の決済保護：すべてのお手続きはPayPalを介して安全に暗号化され、バイヤープロテクション（購入者保護）が適用されます。
- Stock: In Stock
- Model: PR1535
- Weight: 0.10kg
- Manufactured: In Japan
- Ships: Worldwide
- Item Code: TLC06336
Flat $50 USD Shipping worldwide via DHL Express. Maximize your savings by ordering in bulk packs!
International Shipping Note
Please note that any local customs duties, taxes, or import fees are not included in the checkout price and must be borne by the customer.
How it works: Once your package arrives at your country's customs office, DHL will contact you directly via email, SMS, or phone to guide you through the local clearance and payment process.
DHL secure global delivery. Tracked from our door to yours. Kyotow.com Secured
1. Product Overview
The Kyocera DA1470M-GM PR1535 TLC06336 is a Kyocera indexable drill insert for the Magic Drill DRA/DRV indexable drill system. It produces a 14.70 mm hole in a single pass from solid material — replacing HSS twist drills at 3–5× the productivity, with hole tolerances of IT10–IT11 and Ra 1.6–3.2 µm surface finish. The GM chipbreaker is optimized for general drilling of steel & cast iron; strong edge, stable chip evacuation.
Grade PR1535 (MEGACOAT NANO PLUS) is a PVD drilling grade with HV 3,300 surface hardness and 1,050°C heat stability, engineered for heavy interrupted cutting & unstable setups; maximum toughness for milling, drilling and turning. Recommended workpiece groups: Carbon Steel, Alloy Steel, Stainless Steel, Cast Iron, Heat-Resistant Alloy.
Worked example at Ø14.70 mm: on steel at Vc 160 m/min this drill runs ≈ 3,464 RPM and ≈ 332 mm/min feed, drilling a 3×D (44 mm) hole in roughly 8.0 seconds. Internal through-coolant at 10–20+ bar is required for chip evacuation and edge life.
2. Engineering Quick Reference
| Parameter | Specification |
|---|---|
| Full Product Name | Kyocera DA1470M-GM PR1535 TLC06336 |
| Ordering Code | DA1470M-GM |
| Drill Diameter | 14.70 mm |
| System | Magic Drill DRA/DRV indexable drill |
| Chipbreaker | GM |
| Grade | PR1535 |
| MPN | TLC06336 |
3. Ordering Code Decoded
| Code Element | Value | Meaning |
|---|---|---|
| Series | DA | Magic Drill DRA/DRV indexable drill |
| Diameter Digits | 1470 | Ø 14.70 mm (digits ÷ 100) |
| Tolerance Letter | M | Diameter tolerance class |
| Chipbreaker Suffix | GM | general drilling of steel & cast iron; strong edge, stable chip evacuation |
4. Engineering Data
| Parameter | Specification |
|---|---|
| Drill Diameter | 14.70 mm |
| System | Magic Drill DRA/DRV indexable drill |
| Chipbreaker | GM — general drilling of steel & cast iron; strong edge, stable chip evacuation |
| Hole Tolerance (typ.) | IT10–IT11 achievable (IT9 with finish pass) |
| Hole Surface Finish | Ra 1.6–3.2 µm typical |
| Drilling Depth Capability | 2D / 3D / 4D / 5D bodies available |
| Mounting | Screw-clamp in drill body pocket |
| Center Cutting | Yes — solid drilling from solid material |
| Coolant | Internal through-coolant required (min. 10–20 bar recommended) |
5. Grade Technology
| Parameter | Specification |
|---|---|
| Grade | PR1535 |
| Family | PVD |
| Coating | MEGACOAT NANO PLUS |
| Surface Hardness | HV 3,300 |
| Heat Resistance | 1,050°C |
| ISO Range | P25–P40 / M25–M40 / K25–K40 |
| Primary Materials | Carbon Steel, Alloy Steel, Stainless Steel, Cast Iron, Heat-Resistant Alloy |
6. Grade Application Range by ISO Material Group
| ISO Group | Suitability | Note |
|---|---|---|
| P – Steel | Excellent | First-choice application group |
| M – Stainless Steel | Very Good | Fully supported application group |
| K – Cast Iron | Very Good | Fully supported application group |
| N – Non-Ferrous | Not Recommended | Outside grade application window |
| S – HRSA / Titanium | Not Recommended | Outside grade application window |
| H – Hardened Steel | Not Recommended | Outside grade application window |
7. Grade Comparison Within Its Family
| Property | PR1535 (this insert) | PR0315 | PR1115 |
|---|---|---|---|
| Surface Hardness | HV 3,300 | HV 3,400 | HV 3,300 |
| TRS | 3,800 MPa | 3,600 MPa | 3,400 MPa |
| Heat Resistance | 1,050°C | 1,100°C | 1,050°C |
| ISO Range | P25–P40 / M25–M40 / K25–K40 | P10–P25 | P20–P35 / M20–M35 |
8. Chipbreaker Geometry
GM: General drilling of steel & cast iron; strong edge, stable chip evacuation.
9. Recommended Workpiece Materials
Carbon Steel, Alloy Steel, Stainless Steel, Cast Iron, Heat-Resistant Alloy.
10. Hole Quality Capability
| Metric | Capability |
|---|---|
| Hole tolerance | IT10–IT11 (IT9 possible with boring pass) |
| Position accuracy | ±0.05 mm with rigid setup |
| Straightness | 0.05 mm / 100 mm depth |
| Surface finish | Ra 1.6–3.2 µm |
| Roundness | ≤ 0.02 mm typical |
11. Recommended Cutting Conditions & Cycle Times
| Workpiece Material | Vc (m/min) | f (mm/rev) | RPM @ Ø14.70 mm | Feed Rate vf (mm/min) | Cycle Time per 3×D Hole |
|---|---|---|---|---|---|
| Carbon Steel (S45C/C45, HB 180) | 112–160 | 0.06–0.13 | 3,464 | 315–450 | ≈ 5.9 s |
| Alloy Steel (SCM440/4140, HB 280) | 112–160 | 0.06–0.13 | 3,464 | 315–450 | ≈ 5.9 s |
| Stainless Steel (SUS304/1.4301) | 84–120 | 0.05–0.11 | 2,598 | 200–286 | ≈ 9.3 s |
| Gray Cast Iron (FC250/GG25) | 105–150 | 0.07–0.15 | 3,248 | 340–487 | ≈ 5.4 s |
| Nodular Cast Iron (FCD450) | 105–150 | 0.07–0.15 | 3,248 | 340–487 | ≈ 5.4 s |
| Aluminum Alloy (A6061-T6) | 244–350 | 0.07–0.17 | 7,578 | 901–1,288 | ≈ 2.1 s |
| Heat-Resistant Alloy (Inconel 718) | 28–40 | 0.04–0.09 | 866 | 54–78 | ≈ 33.9 s |
| Titanium Alloy (Ti-6Al-4V) | 28–40 | 0.04–0.09 | 866 | 54–78 | ≈ 33.9 s |
Deep-hole note: Beyond 3D use peck drilling (peck = 0.5–1.0×D) or high-pressure through-coolant ≥ 20 bar.
12. Entry & Exit Guidelines
- Reduce feed 50% on angled or interrupted entry surfaces
- Pre-spot with a center drill for highest position accuracy
- Reduce feed 50% for the final 2 mm before breakthrough
- For cross-hole intersections reduce feed 30% through the interruption
13. Wear Limits
| Criterion | Limit | Action |
|---|---|---|
| Flank wear VB | 0.25 mm | Index insert |
| Margin wear | 0.15 mm | Index peripheral insert |
| Chipping | Any | Replace; verify coolant & runout |
14. Compatible Drill Bodies
| Drill Body Requirement | Specification |
|---|---|
| DRA/DRV Ø14.70 mm | 14.70 mm indexable drill body, 2D–5D lengths |
| Shank options | Cylindrical / flatted shanks, metric & inch |
| Insert arrangement | Center + peripheral inserts for balanced cutting |
| Runout requirement | ≤ 0.03 mm TIR at drill tip |
15. Troubleshooting Guide
| Problem | Cause | Solution |
|---|---|---|
| Oversized hole | Runout / peripheral insert wear | Check TIR; index peripheral insert |
| Off-center hole | Center insert wear | Index center insert first |
| Chip packing | Coolant pressure too low | Increase coolant pressure; peck cycle for deep holes |
| Insert chipping at entry | Interrupted entry surface | Reduce feed 50% at entry |
| Burr at exit | Feed too high at breakthrough | Reduce feed 50% for last 2 mm |
16. Operating Guidelines
- Always use internal coolant; minimum 10 bar, recommended 20+ bar
- Verify drill runout ≤ 0.03 mm before operation
- Index center and peripheral inserts as a matched pair for hole-size consistency
- Clean the pocket and screw at every insert change; torque to spec
- Replace worn screws together with the insert
17. Quality Assurance
| Quality Attribute | Specification |
|---|---|
| Manufacturing Standard | ISO 9001:2015 certified Kyocera production, Japan |
| Dimensional Inspection | 100% inspection with CMM-class tolerance control |
| Edge Inspection | Microscopic cutting-edge inspection on every piece |
| Traceability | Laser-marked lot code on packaging; full batch traceability |
| Country of Origin | Japan |
18. Packaging & Ordering
| Parameter | Specification |
|---|---|
| Manufacturer Part Number | TLC06336 |
| Ordering Code | DA1470M-GM |
| Standard Packaging | 10 inserts per box |
| Minimum Order Quantity | 1 box (10 pcs) |
| Stock Status | In stock — ships within 1–3 business days |
| Warranty | 90-day manufacturing-defect warranty |
19. Catalog Meta Data
| Parameter | Specification |
|---|---|
| Brand | Kyocera |
| Product Type | Indexable Drill Insert |
| Full Product Name | Kyocera DA1470M-GM PR1535 TLC06336 |
| Code | DA1470M-GM |
| Diameter | 14.70 mm |
| System | Magic Drill DRA/DRV indexable drill |
| Grade | PR1535 |
| MPN | TLC06336 |
| Origin | Japan |
20. Frequently Asked Questions
Q: What hole size does the DA1470M-GM drill?
A: Ø14.70 mm — the digits after the series prefix are the diameter × 100.
Q: Which drill body accepts the DA1470M-GM?
A: The matching Magic Drill DRA/DRV indexable drill body in the same diameter, available in 2D–5D lengths — see Section 14.
Q: What coolant pressure does the DA1470M-GM need?
A: Minimum 10 bar through-coolant; 20+ bar recommended, mandatory beyond 3D depth.
Q: What cycle time can I expect with the DA1470M-GM?
A: About 5.8 seconds per 3×D hole on steel at the table parameters — see the worked column in Section 10.
Q: Why is my hole oversized with the DA1470M-GM?
A: Check drill runout (≤ 0.03 mm TIR) and index the peripheral insert — the peripheral edge sets hole size.
21. Engineering Support
Free drilling application support from Kyotow.com — body selection, parameters and troubleshooting.
Why Buy from Kyotow.com? 100% genuine OEM Kyocera cutting tools sourced through authorized channels. Full manufacturer warranty & batch traceability. Fast worldwide shipping with tracked delivery. Free engineering support for cutting parameter selection, grade choice and application troubleshooting.
✓ Genuine Kyocera Product
| Manufacturer | Kyocera Corporation |
|---|---|
| Status | Verified Original Product |
| Quality Assurance | Guaranteed Genuine Kyocera Components |
発送・在庫情報
We ship worldwide through our strategic global logistics network. Products are dispatched directly from our international distribution facilities to ensure efficient delivery and customs clearance.
-
Stock Enquiries (在庫確認):
Contact our logistics team at sales.kyotow@gmail.com for real-time inventory status and dispatch location information. -
In-Stock Items (在庫あり):
Normally dispatched within 3 business days from the nearest regional warehouse. -
Factory Procurement (取寄せ):
Manufacturing and dispatch typically require 4–5 weeks. Once production begins, cancellations cannot be accommodated. -
Authenticity Guarantee (本物保証):
All products sold by Kyotow are 100% genuine and sourced through authorized Japanese and international distribution channels.
正確な製品情報
Following the Japanese philosophy of Monozukuri (物の作り), we strive to maintain exceptional technical accuracy throughout our product catalog.
- Confirm dimensions, geometry, coating, and grade using the official Kyocera item code.
- Technical datasheets are available upon request.
- For technical clarification contact sales.kyotow@gmail.com.
返品・キャンセルポリシー
-
100% Accuracy Guarantee:
Full refund or replacement will be provided if the verified Kyocera item received differs from the official item code specified in your order confirmation. -
Order Finality:
Due to automated procurement systems connected directly to global factory distribution channels, orders cannot be modified or cancelled once processing has commenced. -
Technical Assistance:
Please verify machine compatibility, insert geometry, coating, and application grade before placing your order.
安全な決済方法
✓ Encrypted Transactions
✓ Global Buyer Protection
✓ Safe International Payments
All international payments are securely processed through PayPal, ensuring maximum transaction security and customer protection.
国際スピード郵便
✓ Full Shipment Tracking
✓ Global Logistics Network
✓ Flat Worldwide Shipping Rate: USD $50
Orders are shipped through our DHL Express corporate account from distribution facilities across Asia, Europe, and China for reliable international delivery.
Need Technical Assistance?
Contact our industrial tooling specialists for application support, tooling recommendations, datasheets, and compatibility verification.
sales.kyotow@gmail.comDirect Supply Chain Transparency サプライチェーンの透明性
Why are our prices so low? (価格が安い理由): Kyotow sources genuine Kyocera tools directly from domestic Japanese distribution networks, completely bypassing the steep regional markups, localized sales overhead, and heavy middleman margins of Western distributors. We pass 100% of those structural savings directly to your machine shop.
Kyotowは日本の国内流通ネットワークから京セラ正規品を直接仕入れることで、欧米の現地代理店による大幅な上乗せ価格や営業コスト、中間マージンを完全に排除しています。その構造的メリットを、お客様の加工現場へ100%還元いたします。
Domestic Sourced
Procured straight from Japan's local wholesale networks to capture maximum market arbitrage.
100% Genuine
Zero counterfeit risk. All items are brand-new, authentic factory-sealed Japanese stock.
No Regional Markups
We bypass Western corporate sales teams and localized regional overhead costs entirely.
