Kyocera 5/8 ENDMILL 5FL 0.010R TA IC SGS38849
←
Previous
Kyocera 5/8 ENDMILL 4FL TC WF SGS38142 | End Mill | Kyotow.com
Next
Kyocera 5/8 ENDMILL 5FL 0.010R TA IC SGS38855
→
For your absolute peace of mind, all transactions are processed through and secured by PayPal. Your purchase is fully covered by PayPal Buyer Protection, ensuring secure data encryption and trusted dispute resolution.
安心の決済保護：すべてのお手続きはPayPalを介して安全に暗号化され、バイヤープロテクション（購入者保護）が適用されます。
- Stock: In Stock
- Model: ENDMILL
- Weight: 0.10kg
- Manufactured: In Japan
- Ships: Worldwide
- Item Code: SGS38849
DHL secure global delivery. Tracked from our door to yours. Kyotow.com Secured
1. Product Overview
The Kyocera 5/8 ENDMILL 5FL 0.010R TA IC SGS38849 is a solid-carbide, 5-flute end mill with a 0.010 in corner radius. The TA IC grade and coating combination delivers high wear resistance, heat stability, and reliable chip evacuation for precision CNC milling.
2. ISO Designation Breakdown
This code follows the ISO 513 material-group convention and ISO 13399 tool-naming principles:
| Element | Meaning |
|---|---|
| 5/8 | Nominal cutting diameter in inches: 15.875 mm |
| 5FL | Five flutes for high feed rates and improved surface finish |
| 0.010R | Corner radius 0.010 in (0.254 mm) |
| TA | Kyocera carbide grade for steel and cast-iron groups (P/K) |
| IC | Inch-standard cutting geometry |
| ISO 513 | P20–P30 / K20–K30 application range |
3. Engineering Dimensions & Geometry
| Parameter | Value | Notes |
|---|---|---|
| Cutting diameter | 5/8 in (15.875 mm) | Nominal size |
| Shank diameter | 5/8 in (15.875 mm) | Straight shank |
| Number of flutes | 5 | High-flute density |
| Corner radius | 0.010 in (0.254 mm) | Reduces stress concentration |
| Helix angle | Approx. 30° | Typical for this series |
| Overall length | Standard series | Refer to manufacturer datasheet |
4. Grade Details & Characteristics
| Property | TA IC Specification |
|---|---|
| Substrate | Micro-grain solid carbide |
| Coating | Hard PVD coating (AlTiN/TiAlN type) |
| Hardness | Approx. 91–92 HRA |
| Operating temperature | Up to ~900 °C |
| Key benefit | High wear resistance and thermal stability |
5. Grade Comparison Matrix
| Grade | Coating | Best for | Speed |
|---|---|---|---|
| TA IC | AlTiN/TiAlN PVD | Steel, stainless, cast iron | High |
| Uncoated | None | Non-ferrous, plastics | Moderate |
| PR | Advanced PVD | Hardened steels, high-temp alloys | Very high |
| CA | Uncoated / CVD | Cast iron, roughing | Moderate |
6. Chipbreaker Profile
Five-flute geometry with a 0.010R corner radius and open chip pockets provides:
- Controlled chip formation and reduced cutting forces
- Smooth chip evacuation through the flutes
- Corner-radius protection that reduces chipping on entry and exit
- Stable radial cutting in profiling and pocketing
7. Recommended Applications & Materials
| Material Group | Suitability |
|---|---|
| Carbon and alloy steels | Excellent |
| Stainless steels | Very Good |
| Cast iron | Very Good |
| Tool and die steels | Good |
| Titanium and nickel alloys | Good with reduced speeds |
8. Application Map by Operation
| Operation | Suitability | Notes |
|---|---|---|
| Slotting | Good | Use conservative radial engagement |
| Profiling | Excellent | Ideal for 3D contours |
| Pocketing | Excellent | High-stepover finishing |
| Roughing | Good | High feed with lower Ae |
| Semi-finishing / Finishing | Very Good | 0.010R improves surface quality |
9. Recommended Cutting Conditions
Starting parameters for a 5/8 in (15.875 mm) carbide end mill in stable CNC conditions:
| Material | Vc (m/min) | fz (mm) | ap (D) | ae (D) |
|---|---|---|---|---|
| Carbon / alloy steel | 120–180 | 0.10–0.14 | 1.0–1.5 | 0.1–0.3 |
| Stainless steel | 80–130 | 0.08–0.12 | 1.0–1.5 | 0.08–0.2 |
| Cast iron | 150–220 | 0.12–0.16 | 1.0–2.0 | 0.15–0.4 |
| Hardened steel | 60–100 | 0.06–0.10 | 0.5–1.0 | 0.05–0.15 |
10. Operating Guidelines
- Mount the tool in a 5/8 in precision collet, shrink-fit, or hydraulic holder with TIR below 0.01 mm.
- Minimise overhang; keep it as short as the application allows.
- Use climb milling where possible to reduce chip recutting and improve surface finish.
- Apply adequate coolant or compressed air to remove chips and control temperature.
- Start at the lower Vc/fz range and increase until tool life is optimised.
- Inspect the corner radius regularly for wear in high-precision finishing.
11. Toolholder Compatibility
| Holder Type | Shank / Bore | Requirement |
|---|---|---|
| Collet chuck | 5/8 in (15.875 mm) | Precision ER collet |
| Shrink-fit | 5/8 in (15.875 mm) | Best runout control |
| Hydraulic holder | 5/8 in (15.875 mm) | High damping |
12. Packaging & Ordering Info
Each end mill is supplied in a manufacturer protective tube with the part number and batch label clearly marked. Order by manufacturer part number SGS38849. Minimum order: one piece.
13. Catalog Meta Data
| Attribute | Value |
|---|---|
| Product ID | 25526 |
| MPN | SGS38849 |
| Manufacturer | Kyocera |
| Model | ENDMILL |
| Category ID | 355 |
| Weight | 0.1 kg |
| Status | Active |
| Tax Class | 9 |
✓ Genuine Kyocera Product
| Manufacturer | Kyocera Corporation |
|---|---|
| Status | Verified Original Product |
| Quality Assurance | Guaranteed Genuine Kyocera Components |
発送・在庫情報
We ship worldwide through our strategic global logistics network. Products are dispatched directly from our international distribution facilities to ensure efficient delivery and customs clearance.
-
Stock Enquiries (在庫確認):
Contact our logistics team at sales.kyotow@gmail.com for real-time inventory status and dispatch location information. -
In-Stock Items (在庫あり):
Normally dispatched within 3 business days from the nearest regional warehouse. -
Factory Procurement (取寄せ):
Manufacturing and dispatch typically require 4–5 weeks. Once production begins, cancellations cannot be accommodated. -
Authenticity Guarantee (本物保証):
All products sold by Kyotow are 100% genuine and sourced through authorized Japanese and international distribution channels.
正確な製品情報
Following the Japanese philosophy of Monozukuri (物の作り), we strive to maintain exceptional technical accuracy throughout our product catalog.
- Confirm dimensions, geometry, coating, and grade using the official Kyocera item code.
- Technical datasheets are available upon request.
- For technical clarification contact sales.kyotow@gmail.com.
返品・キャンセルポリシー
-
100% Accuracy Guarantee:
Full refund or replacement will be provided if the verified Kyocera item received differs from the official item code specified in your order confirmation. -
Order Finality:
Due to automated procurement systems connected directly to global factory distribution channels, orders cannot be modified or cancelled once processing has commenced. -
Technical Assistance:
Please verify machine compatibility, insert geometry, coating, and application grade before placing your order.
安全な決済方法
✓ Encrypted Transactions
✓ Global Buyer Protection
✓ Safe International Payments
All international payments are securely processed through PayPal, ensuring maximum transaction security and customer protection.
国際スピード郵便
✓ Full Shipment Tracking
✓ Global Logistics Network
✓ Flat Worldwide Shipping Rate: USD $50
Orders are shipped through our DHL Express corporate account from distribution facilities across Asia, Europe, and China for reliable international delivery.
Need Technical Assistance?
Contact our industrial tooling specialists for application support, tooling recommendations, datasheets, and compatibility verification.
sales.kyotow@gmail.comDirect Supply Chain Transparency サプライチェーンの透明性
Why are our prices so low? (価格が安い理由): Kyotow sources genuine Kyocera tools directly from domestic Japanese distribution networks, completely bypassing the steep regional markups, localized sales overhead, and heavy middleman margins of Western distributors. We pass 100% of those structural savings directly to your machine shop.
Kyotowは日本の国内流通ネットワークから京セラ正規品を直接仕入れることで、欧米の現地代理店による大幅な上乗せ価格や営業コスト、中間マージンを完全に排除しています。その構造的メリットを、お客様の加工現場へ100%還元いたします。
Domestic Sourced
Procured straight from Japan's local wholesale networks to capture maximum market arbitrage.
100% Genuine
Zero counterfeit risk. All items are brand-new, authentic factory-sealed Japanese stock.
No Regional Markups
We bypass Western corporate sales teams and localized regional overhead costs entirely.
