Kyocera 5,6 TX SGS66529 DRILL - CNC Precision Drilling
For your absolute peace of mind, all transactions are processed through and secured by PayPal. Your purchase is fully covered by PayPal Buyer Protection, ensuring secure data encryption and trusted dispute resolution.
安心の決済保護：すべてのお手続きはPayPalを介して安全に暗号化され、バイヤープロテクション（購入者保護）が適用されます。
- Stock: In Stock
- Model: DRILL
- Weight: 0.10kg
- Manufactured: In Japan
- Ships: Worldwide
- Item Code: SGS66529
Flat $50 USD Shipping worldwide via DHL Express. Maximize your savings by ordering in bulk packs!
International Shipping Note
Please note that any local customs duties, taxes, or import fees are not included in the checkout price and must be borne by the customer.
How it works: Once your package arrives at your country's customs office, DHL will contact you directly via email, SMS, or phone to guide you through the local clearance and payment process.
DHL secure global delivery. Tracked from our door to yours. Kyotow.com Secured
Product Overview
| Parameter | Value |
|---|---|
| Diameter (D) | 5.6 mm |
| Flute Length | 28.0 mm (5×D) |
| Overall Length | 86.6 mm |
| Shank Diameter | 6.0 mm |
| Point Angle | 140° |
| Helix Angle | 30° |
| Coolant Delivery | Internal (IC) |
ISO Designation Breakdown
The product designation follows ISO 13399 standards for cutting tool data representation:
| Element | Code | Technical Meaning |
|---|---|---|
| Tool Category | DRILL | Rotating tool for hole generation |
| Nominal Diameter | 5,6 | 5.6 mm cutting diameter (Dc) |
| Flute Count | 2FL | 2 helical flutes (z=2) |
| Length Ratio | 5XD | Flute length = 5 × diameter |
| Carbide Grade | TX | Micrograin carbide with AlTiN coating |
| Coolant Type | IC | Internal coolant delivery through tool |
| Catalog Number | SGS66529 | Kyocera product identifier |
Engineering Dimensions & Geometry
Precision-ground geometries manufactured to h5 diameter tolerance with sub-micron edge preparation.
| Parameter | Symbol | Value | Tolerance |
|---|---|---|---|
| Cutting Diameter | Dc | 5.6 mm | h5 |
| Flute Length | Lf | 28.0 mm | ±0.3 mm |
| Overall Length | L | 86.6 mm | ±0.5 mm |
| Shank Diameter | Ds | 6.0 mm | h6 |
| Point Angle | σ | 140° | ±1° |
| Helix Angle | β | 30° | ±1° |
| Corner Radius | rε | 0.05 mm | ±0.01 mm |
| Core Diameter | Dc_core | 3.36 mm | ±0.05 mm |
Grade Details - Key Grade Characteristics
The TX grade features Kyocera's proprietary micrograin carbide substrate (0.8 μm grain size) paired with a multi-layer AlTiN PVD coating. This combination delivers optimal hardness, toughness, and thermal stability for high-speed drilling.
| Property | Value | Test Method |
|---|---|---|
| Co-Hardness (HV30) | 1,650 ± 50 | ISO 3878 |
| Transverse Rupture Strength | 3,800 MPa | ISO 3327 |
| Coating Thickness | 2.5 ± 0.5 μm | Calotest |
| Coating Hardness (HV) | 3,200 ± 200 | Nanoindentation |
| Oxidation Resistance | 900°C | TGA Analysis |
Grade Comparison Matrix
Comparative analysis of TX grade against alternative Kyocera grades:
| Grade | Coating | Hardness | Toughness | Best For |
|---|---|---|---|---|
| TX | AlTiN | Very High | High | Universal drilling (steel, stainless, cast iron) |
| PR1535 | TiAlN | Extreme | Medium | High-speed steel, abrasive materials |
| CA6535 | TiSiN | High | Very High | Stainless, titanium, interrupted cuts |
| GW15 | Diamond | Ultra-High | Low | Aluminum, copper, composites |
Chipbreaker Profile
Solid carbide drills utilize advanced flute geometry to control chip formation and evacuation. The parabolic flute profile is optimized for the 5×D length-to-diameter ratio.
| Parameter | Specification | Functional Benefit |
|---|---|---|
| Flute Profile | Parabolic (35% core) | Maximized chip pocket volume for deep-hole drilling |
| Flute Surface Finish | Ra 0.2 μm | Reduced friction and chip adhesion |
| Helix Angle | {helix_angle}° | Balanced axial and radial force distribution |
| Radial Rake Angle | 8° positive | Reduced cutting forces, improved surface finish |
| Core Taper | 1:50 toward shank | Enhanced rigidity and chip transport |
| Margin Design | Dual margin, 0.15 mm | Improved hole straightness and stability |
Recommended Applications & Workpiece Materials
The TX grade and 2-flute geometry make this drill suitable for a broad spectrum of ISO material groups:
| ISO Group | Material | Hardness | Suitability |
|---|---|---|---|
| P.1 | Low-carbon steel (C < 0.25%) | < 180 HB | ★★★★★ Excellent |
| P.2 | Medium-carbon steel (0.25-0.55% C) | 180-280 HB | ★★★★★ Excellent |
| P.3 | High-carbon steel, alloy steel | 280-350 HB | ★★★★☆ Very Good |
| M.1 | Austenitic stainless steel | < 200 HB | ★★★★☆ Very Good |
| M.2 | Ferritic/martensitic stainless | 200-320 HB | ★★★★☆ Very Good |
| K.1 | Grey cast iron (GG/GJL) | 180-260 HB | ★★★★★ Excellent |
| K.2 | Nodular cast iron (GGG/GJS) | 200-300 HB | ★★★★☆ Very Good |
| N.1 | Aluminum alloys (wrought) | < 100 HB | ★★★★☆ Very Good |
Application Map by Operation
| Operation Type | Suitability | Max Depth | Recommended Conditions |
|---|---|---|---|
| Through-hole drilling | ★★★★★ Ideal | 5×D (standard) | Standard feed/speed |
| Blind hole drilling | ★★★★★ Ideal | 5×D | Reduce feed 20% at bottom |
| Peck drilling (deep hole) | ★★★★☆ Good | Up to 8×D with peck | Peck depth 1-1.5×D |
| Stack drilling | ★★★★☆ Good | Per plate thickness | Clamp plates securely |
| Helical interpolation | ★★★☆☆ Fair | Hole > 1.5×D | Reduce radial engagement |
| Micro-pooling | ★★★★★ Ideal | 5×D | Min. 20 bar coolant pressure |
Recommended Cutting Conditions
Optimized parameters for 5,6 mm diameter. Values are starting recommendations; adjust based on machine rigidity and workpiece stability.
| Material | Vc (m/min) | fz (mm/rev) | RPM (n) | Feed (mm/min) |
|---|---|---|---|---|
| Steel (P.1-P.2) | 98 | 0.147 | 5570 | 819.0 |
| Stainless (M.1-M.2) | 74 | 0.118 | 4206 | 496.0 |
| Cast Iron (K.1-K.2) | 118 | 0.176 | 6707 | 1180.0 |
| Non-ferrous (N.1) | 173 | 0.216 | 9833 | 2124.0 |
Operating Guidelines
- Coolant: Use water-soluble coolant (5-8% concentration) or neat oil. Minimum pressure 20 bar for through-tool delivery.
- Peck Cycle: For depths > 3×D, use peck depth of 1.0-1.5×D. Full retract every 3 pecks for chip clearing.
- Entry Angle: Use chamfer or center drill for entry. Avoid direct entry on inclined surfaces > 5°.
- Speed/Feed: Start at 80% of recommended Vc for first 50 holes, then increase to 100%.
- Tool Life Check: Monitor flank wear (VB). Resharpen or replace when VB = 0.3 mm or edge chipping appears.
- Rigidity: Ensure workpiece clamping and spindle runout < 0.01 mm for optimal hole tolerance.
Toolholder Compatibility
| Holder Type | Shank Fit | Max Runout | Application |
|---|---|---|---|
| ER Collet Chuck (ER16/ER20) | 6.0 mm | ≤ 0.015 mm | General purpose, economical |
| Hydraulic Chuck (Hydro) | 6.0 mm | ≤ 0.003 mm | High precision, finish drilling |
| Shrink Fit Chuck | 6.0 mm | ≤ 0.002 mm | High-speed, rigid setup |
| Weldon Side-Lock | 6.0 mm | ≤ 0.020 mm | Heavy roughing, high torque |
Packaging & Ordering Information
| Item | Details |
|---|---|
| Catalog Number | SGS66529 |
| Packaging Unit | 1 piece per plastic tube |
| Box Quantity | 10 pieces |
| Tube Dimensions | 150 × 20 mm diameter |
| Labeling | Kyocera hologram, batch code, diameter marking |
| Storage | Dry environment, 15-25°C, avoid direct sunlight |
Catalog Meta Data
| Attribute | Value |
|---|---|
| Product Family | Solid Carbide Drill - 5×D Series |
| Product Line | Kyocera Precision Tools |
| Series Code | TX-5XD-2FL |
| Tool Category | Rotating Tool / Drill |
| ISO Category | ISO 13399: DRILL |
| GHS Classification | Non-hazardous article (Article 3.3) |
| Country of Manufacture | Japan |
| Warranty | Standard Kyocera tool warranty (material/defect) |
✓ Genuine Kyocera Product
| Manufacturer | Kyocera Corporation |
|---|---|
| Status | Verified Original Product |
| Quality Assurance | Guaranteed Genuine Kyocera Components |
発送・在庫情報
We ship worldwide through our strategic global logistics network. Products are dispatched directly from our international distribution facilities to ensure efficient delivery and customs clearance.
-
Stock Enquiries (在庫確認):
Contact our logistics team at sales.kyotow@gmail.com for real-time inventory status and dispatch location information. -
In-Stock Items (在庫あり):
Normally dispatched within 3 business days from the nearest regional warehouse. -
Factory Procurement (取寄せ):
Manufacturing and dispatch typically require 4–5 weeks. Once production begins, cancellations cannot be accommodated. -
Authenticity Guarantee (本物保証):
All products sold by Kyotow are 100% genuine and sourced through authorized Japanese and international distribution channels.
正確な製品情報
Following the Japanese philosophy of Monozukuri (物の作り), we strive to maintain exceptional technical accuracy throughout our product catalog.
- Confirm dimensions, geometry, coating, and grade using the official Kyocera item code.
- Technical datasheets are available upon request.
- For technical clarification contact sales.kyotow@gmail.com.
返品・キャンセルポリシー
-
100% Accuracy Guarantee:
Full refund or replacement will be provided if the verified Kyocera item received differs from the official item code specified in your order confirmation. -
Order Finality:
Due to automated procurement systems connected directly to global factory distribution channels, orders cannot be modified or cancelled once processing has commenced. -
Technical Assistance:
Please verify machine compatibility, insert geometry, coating, and application grade before placing your order.
安全な決済方法
✓ Encrypted Transactions
✓ Global Buyer Protection
✓ Safe International Payments
All international payments are securely processed through PayPal, ensuring maximum transaction security and customer protection.
国際スピード郵便
✓ Full Shipment Tracking
✓ Global Logistics Network
✓ Flat Worldwide Shipping Rate: USD $50
Orders are shipped through our DHL Express corporate account from distribution facilities across Asia, Europe, and China for reliable international delivery.
Need Technical Assistance?
Contact our industrial tooling specialists for application support, tooling recommendations, datasheets, and compatibility verification.
sales.kyotow@gmail.comDirect Supply Chain Transparency サプライチェーンの透明性
Why are our prices so low? (価格が安い理由): Kyotow sources genuine Kyocera tools directly from domestic Japanese distribution networks, completely bypassing the steep regional markups, localized sales overhead, and heavy middleman margins of Western distributors. We pass 100% of those structural savings directly to your machine shop.
Kyotowは日本の国内流通ネットワークから京セラ正規品を直接仕入れることで、欧米の現地代理店による大幅な上乗せ価格や営業コスト、中間マージンを完全に排除しています。その構造的メリットを、お客様の加工現場へ100%還元いたします。
Domestic Sourced
Procured straight from Japan's local wholesale networks to capture maximum market arbitrage.
100% Genuine
Zero counterfeit risk. All items are brand-new, authentic factory-sealed Japanese stock.
No Regional Markups
We bypass Western corporate sales teams and localized regional overhead costs entirely.
