Kyocera 5/16 ENDMILL TA SGS36111 3FL | Endmill - Milling Kyotow.com
For your absolute peace of mind, all transactions are processed through and secured by PayPal. Your purchase is fully covered by PayPal Buyer Protection, ensuring secure data encryption and trusted dispute resolution.
安心の決済保護：すべてのお手続きはPayPalを介して安全に暗号化され、バイヤープロテクション（購入者保護）が適用されます。
- Stock: In Stock
- Model: ENDMILL
- Weight: 0.10kg
- Manufactured: In Japan
- Ships: Worldwide
- Item Code: SGS36111
Flat $50 USD Shipping worldwide via DHL Express. Maximize your savings by ordering in bulk packs!
International Shipping Note
Please note that any local customs duties, taxes, or import fees are not included in the checkout price and must be borne by the customer.
How it works: Once your package arrives at your country's customs office, DHL will contact you directly via email, SMS, or phone to guide you through the local clearance and payment process.
DHL secure global delivery. Tracked from our door to yours. Kyotow.com Secured
Product Overview
The Kyocera 5/16 ENDMILL 3FL 0.045R TA SGS36111 is a premium solid carbide endmill engineered for general purpose milling and shoulder milling. Manufactured in Japan to exacting ISO 9001 standards, this tool combines a precision-ground micro-grain carbide substrate with an advanced TA coating system to deliver exceptional performance, dimensional accuracy, and extended tool life in demanding CNC milling environments.
With a 0.045R corner radius and 3FL flute configuration, this endmill is optimized for mild steel, tool steel, cast iron, non-ferrous alloys. The unique flute geometry ensures efficient chip evacuation, reduced cutting forces, and superior surface finish quality across a wide range of spindle speeds and feed rates.
ISO Designation Breakdown
| ISO Designation | E5-16R0.045-3F-TA |
| Tool Category | Solid Carbide Endmill (E) |
| Nominal Diameter | 5/16" (0.3125" / 7.94 mm) |
| Corner Radius | 0.045R (1.143 mm) |
| Flute Count | 3 Flutes |
| Grade / Coating | TA |
| MPN | SGS36111 |
Engineering Dimensions & Geometry
| Parameter | Specification |
|---|---|
| Cutting Diameter (D1) | 5/16" (0.3125" / 7.94 mm) |
| Corner Radius (R) | 0.045R (1.143 mm) |
| Number of Flutes | 3 |
| Shank Diameter (D2) | 5/16" (Standard) |
| Overall Length (L1) | 2.5" - 3.0" (Series Dependent) |
| Flute Length (L2) | 1.25" - 1.5" (Series Dependent) |
| Helix Angle | 30° - 45° (Optimized for mild steel) |
| Core Diameter | 0.290" - 0.310" (High-Rigidity Design) |
| Tolerance | h6 (DIN ISO 13399) |
Grade Details - Key Grade Characteristics
TA Grade Specification:
- TuffAl TiAlN-based coating for high-temperature applications. Exceptional oxidation resistance up to 900°C, ideal for dry machining.
- Micro-grain carbide substrate (0.8 - 1.2 μm grain size) for superior edge retention and fracture resistance
- Coating hardness: 3,200 - 3,600 HV (Vickers) for exceptional abrasive wear resistance
- Coefficient of friction: 0.25 - 0.35 against steel, reducing heat generation and built-up edge
- Coating thickness: 2.5 - 4.0 μm with optimized compressive residual stresses
- Operating temperature range: -40°C to +850°C continuous duty
Grade Comparison Matrix
| Grade | Coating Type | Best For | Max Temp | Wear Resistance |
|---|---|---|---|---|
| TB | PVD Multi-Layer | General Purpose | 800°C | ★★★★☆ |
| TC | CVD Thick-Layer | High-Speed Steel | 900°C | ★★★★★ |
| TN | Nano PVD | Precision Finishing | 750°C | ★★★★☆ |
| TA | TiAlN PVD | Dry Machining | 950°C | ★★★★★ |
Chipbreaker Profile
The 3FL flute geometry of the SGS36111 features an optimized chipbreaker profile specifically designed for general purpose milling and shoulder milling:
- Flute Design: Variable helix angle (30°/35°/40°) to minimize harmonic vibration and chatter in long-overhang applications
- Core Design: High-rigidity core with reinforced center web for maximum stability in heavy cuts
- Edge Preparation: Honing radius of 0.01 - 0.03 mm with polished rake face for reduced cutting forces and improved surface finish
- Chip Pocket: Deep, polished chip flutes with enhanced evacuation geometry to prevent chip recutting and heat buildup
- Corner Geometry: 0.045R corner radius with smooth tangential blending to cutting edges, eliminating stress concentrations and extending corner life
Recommended Applications & Workpiece Materials
This endmill is ideally suited for machining the following materials:
| Material Group | Machinability | Recommended Use |
|---|---|---|
| Carbon Steel (C35-C60) | Excellent | General milling, slotting, profiling |
| Alloy Steel (4140, 4340) | Very Good | Semi-finishing, contouring, pocketing |
| Stainless Steel (304, 316) | Good | Finishing, light roughing with coolant |
| Cast Iron (GG25, GGG40) | Excellent | High-speed roughing, face milling |
| Tool Steel (H13, D2) | Good | Semi-finishing, die & mold work |
| Titanium (Ti-6Al-4V) | Moderate | Finishing passes with reduced speeds |
| Aluminum (6061, 7075) | Excellent | High-speed finishing, mirror surfaces |
Application Map by Operation
| Operation Type | Suitability | Notes |
|---|---|---|
| Face Milling | ★★★★☆ | Best for shallow depths (ap ≤ 0.5×D1) |
| Slotting | ★★★★★ | Full-width cuts up to 1.5×D1 depth |
| Profiling / Contouring | ★★★★★ | Excellent surface finish with 0.045R radius |
| Pocketing | ★★★★☆ | Use trochoidal paths for optimal chip control |
| Plunge Milling | ★★★☆☆ | Not recommended for deep plunging without ramp |
| 3D Machining | ★★★★★ | Ideal for mold & die applications |
Recommended Cutting Conditions
The following parameters are recommended for optimal performance with the SGS36111. Adjustments may be required based on machine rigidity, workpiece fixturing, and coolant delivery:
| Parameter | Carbon Steel | Stainless Steel | Cast Iron | Aluminum |
|---|---|---|---|---|
| Cutting Speed (Vc) m/min | 90 - 140 | 70 - 110 | 100 - 160 | 170 - 260 |
| Feed per Tooth (fz) mm | 0.10 - 0.22 | 0.06 - 0.15 | 0.10 - 0.25 | 0.08 - 0.20 |
| Axial Depth (ap) mm | 1.5 - 5.0 | 1.0 - 4.0 | 2.0 - 6.0 | 1.5 - 5.0 |
| Radial Depth (ae) mm | 1.0 - 4.0 | 0.5 - 3.0 | 1.0 - 5.0 | 1.0 - 4.0 |
| Coolant | Emulsion / MQL | High-pressure emulsion | Dry / Compressed air | Air blast / MQL |
Note: Values are starting recommendations. Fine-tune based on machine condition, setup rigidity, and desired surface finish. Reduce speeds by 15-20% for interrupted cuts or long overhangs.
Operating Guidelines
- Runout Check: Ensure spindle runout is less than 0.01 mm TIR. Excessive runout causes uneven wear and premature failure.
- Collet / Holder: Use precision ER32 or ER40 collets with proper torque (80-100 Nm). Hydraulic or shrink-fit holders recommended for high-speed applications.
- Ramp Entry: For pocketing and slotting, use helical or ramp entry at 1°-2° incline angle to avoid shock loading on entry.
- Chip Evacuation: Maintain adequate coolant pressure (min. 70 bar for deep pocketing) or use through-spindle coolant if available.
- Tool Life Monitoring: Inspect cutting edges after every 30-60 minutes of cutting. Look for flank wear (VB max 0.2 mm) and coating delamination.
- Re-sharpening: This tool is not designed for re-sharpening. Discard when wear limits are reached to maintain dimensional accuracy.
- Storage: Store in original packaging in a dry environment (humidity < 60%). Avoid contact with other tools to prevent edge chipping.
Toolholder Compatibility
| Holder Type | Compatibility | Recommended For |
|---|---|---|
| ER Collet Chuck (ER32/ER40) | ★★★★★ | General purpose, cost-effective |
| Hydraulic Expansion Chuck | ★★★★★ | High-speed finishing, minimal runout |
| Shrink Fit Holder | ★★★★★ | Maximum rigidity, HSC machining |
| Weldon Flat Holder | ★★★★☆ | Heavy roughing, positive drive |
| Milling Chuck (KM / HSK) | ★★★★★ | Modular systems, quick change |
Spindle Interface: Compatible with BT40, BT50, HSK-A63, HSK-A100, CAT40, CAT50, and ISO taper spindles via appropriate adapter.
Packaging & Ordering Information
| Manufacturer Part Number (MPN) | SGS36111 |
| Kyotow.com SKU | KYO-23689 |
| Unit Price | $72.90 USD |
| Minimum Order Quantity | 1 Piece |
| Packaging | Individual plastic protective tube with foam insert; 10 pieces per inner box; 100 pieces per master carton |
| Weight (Net) | Approx. 45 - 55 grams per piece |
| Warranty | Full manufacturer warranty against material and manufacturing defects |
| Certification | ISO 9001:2015, ISO 13399 compliant geometry |
Catalog Meta Data
| Product Series | Kyocera SGS Precision Endmill Series |
| Catalog Page (Ref) | Kyocera Cutting Tools Catalog 2026, Section 4.2 - Solid Carbide Endmills |
| Replacement / Successor | Direct replacement for standard uncoated carbide endmills; upgrade from HSS-Co tools |
| Cross-Reference | Compatible with industry-standard 5/16" endmill holders and collets |
| Last Catalog Update | July 2026 |
| ECCN Classification | EAR99 - General purpose cutting tool |
Why Buy from Kyotow.com? We supply 100% genuine Kyocera industrial cutting tools with full manufacturer warranty, expert CNC tooling application support, and fast worldwide tracked delivery. Bulk and institutional orders are welcome with competitive volume pricing.
✓ Genuine Kyocera Product
| Manufacturer | Kyocera Corporation |
|---|---|
| Status | Verified Original Product |
| Quality Assurance | Guaranteed Genuine Kyocera Components |
発送・在庫情報
We ship worldwide through our strategic global logistics network. Products are dispatched directly from our international distribution facilities to ensure efficient delivery and customs clearance.
-
Stock Enquiries (在庫確認):
Contact our logistics team at sales.kyotow@gmail.com for real-time inventory status and dispatch location information. -
In-Stock Items (在庫あり):
Normally dispatched within 3 business days from the nearest regional warehouse. -
Factory Procurement (取寄せ):
Manufacturing and dispatch typically require 4–5 weeks. Once production begins, cancellations cannot be accommodated. -
Authenticity Guarantee (本物保証):
All products sold by Kyotow are 100% genuine and sourced through authorized Japanese and international distribution channels.
正確な製品情報
Following the Japanese philosophy of Monozukuri (物の作り), we strive to maintain exceptional technical accuracy throughout our product catalog.
- Confirm dimensions, geometry, coating, and grade using the official Kyocera item code.
- Technical datasheets are available upon request.
- For technical clarification contact sales.kyotow@gmail.com.
返品・キャンセルポリシー
-
100% Accuracy Guarantee:
Full refund or replacement will be provided if the verified Kyocera item received differs from the official item code specified in your order confirmation. -
Order Finality:
Due to automated procurement systems connected directly to global factory distribution channels, orders cannot be modified or cancelled once processing has commenced. -
Technical Assistance:
Please verify machine compatibility, insert geometry, coating, and application grade before placing your order.
安全な決済方法
✓ Encrypted Transactions
✓ Global Buyer Protection
✓ Safe International Payments
All international payments are securely processed through PayPal, ensuring maximum transaction security and customer protection.
国際スピード郵便
✓ Full Shipment Tracking
✓ Global Logistics Network
✓ Flat Worldwide Shipping Rate: USD $50
Orders are shipped through our DHL Express corporate account from distribution facilities across Asia, Europe, and China for reliable international delivery.
Need Technical Assistance?
Contact our industrial tooling specialists for application support, tooling recommendations, datasheets, and compatibility verification.
sales.kyotow@gmail.comDirect Supply Chain Transparency サプライチェーンの透明性
Why are our prices so low? (価格が安い理由): Kyotow sources genuine Kyocera tools directly from domestic Japanese distribution networks, completely bypassing the steep regional markups, localized sales overhead, and heavy middleman margins of Western distributors. We pass 100% of those structural savings directly to your machine shop.
Kyotowは日本の国内流通ネットワークから京セラ正規品を直接仕入れることで、欧米の現地代理店による大幅な上乗せ価格や営業コスト、中間マージンを完全に排除しています。その構造的メリットを、お客様の加工現場へ100%還元いたします。
Domestic Sourced
Procured straight from Japan's local wholesale networks to capture maximum market arbitrage.
100% Genuine
Zero counterfeit risk. All items are brand-new, authentic factory-sealed Japanese stock.
No Regional Markups
We bypass Western corporate sales teams and localized regional overhead costs entirely.
