Kyocera ENDMILL TiN SGS31650 4FL Sq | End Mill - Steel Kyotow.com
- Stock: In Stock
- Model: ENDMILL
- Weight: 0.10kg
- Manufactured: In Japan
- Ships: Worldwide
- Item Code: SGS31650
Product Overview
The Kyocera SGS31650 is a Series 16 solid carbide end mill from the Kyocera SGS Precision Tools general-application program. It features a 1/16″ (1.587 mm) cutting diameter, 4 flutes with a 30° helix, a square end geometry and a Ti-NAMITE® (TiN) coating on a tough micrograin carbide substrate. Engineered for maximum-rigidity milling — the stub flute length minimizes tool deflection for high-precision work in steels, stainless, cast iron and non-ferrous materials, it delivers reliable, high-precision milling performance across steels, stainless steels, cast irons and non-ferrous alloys.
ISO Designation Breakdown
The table below decodes every element of the catalog designation and the geometry class it assigns to this tool.
| Code Element | Meaning | Detail |
|---|---|---|
| SGS | Brand / Program | Kyocera SGS Precision Tools — solid carbide rotary tool program of Kyocera Corporation |
| 31650 | EDP Number | Catalog EDP identifying Series 16 — 4 Flute, Square End, Stub Length, Fractional |
| Series 16 | Tool Series | Maximum-rigidity milling — the stub flute length minimizes tool deflection for high-precision work in steels, stainless, cast iron and non-ferrous materials |
| Flute Count | Geometry | 4 flutes, 30° right-hand helix, right-hand cut |
| End Style | Geometry | Square end with sharp corner |
| Coating Option | Grade | Ti-NAMITE® (TiN) coated |
Applicable workpiece material groups (ISO 513): P (steels), M (stainless steels), K (cast irons), N (non-ferrous), S (heat-resistant alloys, reduced parameters).
Engineering Dimensions & Geometry
| Dimension | Value (in) | Value (metric) |
|---|---|---|
| Cutting diameter DC | 1/16″ | 1.587 mm |
| Length of cut APMX (per end) | 1/8″ | 3.175 mm |
| Overall length LF | 1-1/2″ | 38.1 mm |
| Shank diameter DCON | 1/8″ | 3.175 mm |
| Geometry Parameter | Specification |
|---|---|
| Cutting diameter tolerance DC | +0.000 / –0.001 in |
| Shank tolerance DCON | h6 |
| End geometry | Square end, sharp corner |
| Helix angle | 30° right-hand |
| Number of flutes | 4 |
| Cutting direction | Right-hand cut, center cutting |
| Configuration | Single end |
| Shank style | Plain cylindrical shank |
Grade Details - Key Grade Characteristics
Substrate: premium micrograin solid carbide engineered for an optimal balance of wear resistance and transverse rupture strength in general-purpose milling.
| Characteristic | Specification |
|---|---|
| Coating | Ti-NAMITE® (TiN), PVD applied — gold finish |
| Coating micro-hardness | ≈ 2,300 HV 0.05 |
| Thermal stability | up to ≈ 600°C at the cutting edge |
| Friction behavior | Low-friction gold layer reduces built-up edge and eases chip flow |
| Best suited for | General steels and low-alloy steels at moderate speeds; also stainless and cast iron |
| Key benefit | Extended tool life versus uncoated carbide with excellent edge lubricity |
Grade Comparison Matrix
| Grade Variant | Coating | Color | Hardness | Max Service Temp. | Preferred Application |
|---|---|---|---|---|---|
| Uncoated (Bright) | None | Silver-gray | ≈1,600–1,800 HV | ≈800°C | Aluminum, copper alloys, plastics, general steels |
| Ti-NAMITE® (TiN) ✓ this product | PVD TiN | Gold | ≈2,300 HV | ≈600°C | General steels, low-alloy steels at moderate speeds |
| Ti-NAMITE®-C (TiCN) | PVD TiCN | Blue-gray | ≈3,000 HV | ≈400°C | Abrasive materials, cast irons, wear-critical cuts |
| Ti-NAMITE®-A (AlTiN) | PVD AlTiN | Black / charcoal | ≈3,300 HV | ≈900°C | Steels, stainless, high-temp alloys, dry milling |
Each geometry in this series is offered in multiple grade variants under different EDP numbers; the EDP on this page corresponds to the variant marked above.
Chipbreaker Profile
The 4-flute, 30° helix design balances core strength with efficient chip evacuation. Chips are curled away from the cutting zone along the helical flutes, supporting higher feed-per-tooth values in profiling and finishing while maintaining a rigid, chatter-resistant tool core.
| Feature | Specification | Function |
|---|---|---|
| Helix angle | 30° | Balances shearing action and edge strength |
| Flute count | 4 | Higher feed capacity and surface finish |
| Chip gullet | Optimized, polished | Fast, unobstructed chip evacuation |
| Edge preparation | Honed micro-edge | Stable cut entry, reduced micro-chipping |
| Relief | Eccentric primary relief | Lower friction and heat at the flank |
Recommended Applications & Workpiece Materials
| Workpiece Material Group (ISO 513) | Suitability | Notes |
|---|---|---|
| P — Carbon & alloy steels (1018, 1040, 4140, 8620) | ★★★★☆ | Recommended — classic TiN application |
| M — Stainless steels (303, 304, 316, 17-4 PH) | ★★★☆☆ | Use with flood coolant |
| K — Cast irons (gray, ductile) | ★★★★☆ | Very good wear resistance |
| N — Aluminum & copper alloys, plastics | ★★★★☆ | Very good — low built-up edge |
| S — Titanium & heat-resistant alloys | ★★☆☆☆ | Reduced speed/feed; rigid setup |
| H — Hardened steels ≤ 45 HRc | ★☆☆☆☆ | Light finishing passes only |
Application Map by Operation
| Milling Operation | Suitability & Notes |
|---|---|
| Slotting | ✓ Very good |
| Profiling / side milling | ✓ Excellent |
| Pocketing | ✓ Excellent |
| Ramping / helical interpolation | ✓ Good |
| 3D contouring / die & mold | — not applicable (square end) |
| Finishing | ✓ Excellent — multi-edge finishing |
Recommended Cutting Conditions
Catalog starting values for a 1/16″, 4-flute tool. Profile: Ae ≤ 0.25×DC, Ap ≤ 1.5×DC. Slot: Ae = 1×DC, Ap ≤ 0.4–1×DC (2FL: ≤1×DC with reduced Fz). Reduce speed and feed for harder material conditions; for finishing reduce feed and Ae (≤ 0.02×DC).
| Material Group | Vc Profile / Slot (sfm) | Fz (ipt) | RPM Profile | Feed Profile (ipm) | RPM Slot | Feed Slot (ipm) |
|---|---|---|---|---|---|---|
| Carbon Steels (1018, 1040, 12L15) | 460 / 335 | 0.00013 | 28,120 | 14.62 | 20,480 | 10.65 |
| Alloy Steels (4140, 4150, 8620) | 335 / 245 | 0.00009 | 20,480 | 7.37 | 14,970 | 5.39 |
| Stainless Steels (304, 316, 17-4 PH) | 255 / 185 | 0.00008 | 15,590 | 4.99 | 11,310 | 3.62 |
| Cast Irons (Gray, Ductile) | 335 / 245 | 0.00013 | 20,480 | 10.65 | 14,970 | 7.79 |
| Aluminum Alloys (6061, 7075) | 880 / 640 | 0.00025 | 53,790 | 53.79 | 39,120 | 39.12 |
Formulas: RPM = (Vc × 3.82) / DC • Feed (ipm) = Fz × number of flutes × RPM.
Operating Guidelines
- Hold total indicated runout (TIR) below 0.0004″ (0.01 mm); micro-diameter tools are extremely sensitive to runout.
- Use the shortest possible tool overhang and a rigid, balanced holder; avoid extending the flute length requirement.
- Start at the lower end of the recommended speed/feed window and increase in steps while observing chip color and spindle load.
- For finishing passes, reduce radial engagement to ≤ 0.02×DC and reduce feed accordingly for best surface quality.
- Prefer climb milling for best surface finish and tool life on machines with minimal backlash.
- Use flood coolant or air blast appropriate to the material; for AlTiN-coated tools, dry machining or MQL is often optimal in steels.
- Do not dwell or rub in the cut — maintain positive feed to prevent work hardening, especially in stainless steels.
- Inspect the cutting edge regularly under magnification; replace at the first sign of flank wear > 0.004″ to protect part accuracy.
Toolholder Compatibility
Shank diameter: 1/8″ (3.175 mm), tolerance h6. Holder compatibility for this configuration:
| Holder System | Compatible | Notes |
|---|---|---|
ER collet chuck (ER11/ER16/ER20/ER25/ER32 as applicable)
-40 % 1. Product OverviewThe Kyocera KGDR2020X-3T10S Indexable Tool Holder is a Kyocera grooving / parting holder — holder system for grooving and parting i..
$128.37 USD $213.94 USD 
-40 % 1. Product Overview
The DCGT11T302L-A3 from Kyocera is a precision-engineered KW10 uncoated carbide indexable turning insert manufactured in Japan. De..
$6.78 USD $11.30 USD 
-40 % Product Overview
The CNMG120412PT CA510 TAA00907 is a premium indexable carbide turning insert manufactured by Kyocera in Japan. Designed for steel me..
$3.77 USD $6.28 USD 
-40 % 1. Product OverviewThe Kyocera DNGA150416S01730MET KBN020 TFC00095 is a precision indexable turning insert engineered by Kyocera in Japan for CNC lath..
$41.42 USD $69.04 USD 
-40 % 1. Product Overview
The Kyocera 16,0 ENDMILL 7FL Corner Radius 2.0mm SGS74624 is a premium solid carbide endmill precision-engineered for high-perform..
$758.64 USD $1,264.39 USD
-40 % Product Overview
Engineered for demanding micro-milling work, the Kyocera SGM09717 combines a 0.078" (1.981 mm) cutting diameter with a true square-en..
$50.54 USD $84.23 USD 
New
-40 % About the TNMG220412 – Kyocera Industrial Tool
The TNMG220412 CA025P TMH00289 is a precision-engineered carbide tool manufactured by Kyocera in Japan...
$5.48 USD $9.14 USD 
New
-40 % Product Overview
The WBGT080204R-F is a KW10 grade uncoated carbide indexable turning insert manufactured by Kyocera in Japan. Engineered for Boring, ..
$5.23 USD $8.72 USD
New
-40 % Product Overview
The WBGT080204L-F is a KW10 grade uncoated carbide indexable turning insert manufactured by Kyocera in Japan. Engineered for Boring, ..
$5.23 USD $8.72 USD
New
-40 % Product Overview
The WBGT080202L-F is a KW10 grade uncoated carbide indexable turning insert manufactured by Kyocera in Japan. Engineered for Boring, ..
$5.23 USD $8.72 USD
New
-40 % Product Overview
The WBGT060104R-F is a KW10 grade uncoated carbide indexable turning insert manufactured by Kyocera in Japan. Engineered for Boring, ..
$4.70 USD $7.84 USD
New
-40 % Product Overview
The WBGT060104L-F is a KW10 grade uncoated carbide indexable turning insert manufactured by Kyocera in China. Engineered for Boring, ..
$4.82 USD $8.03 USD |