Kyocera 1.0 Carbide SGS30575 Endmill | Endmill - Grooving Kyotow.com
For your absolute peace of mind, all transactions are processed through and secured by PayPal. Your purchase is fully covered by PayPal Buyer Protection, ensuring secure data encryption and trusted dispute resolution.
安心の決済保護：すべてのお手続きはPayPalを介して安全に暗号化され、バイヤープロテクション（購入者保護）が適用されます。
- Stock: In Stock
- Model: ENDMILL
- Weight: 0.10kg
- Manufactured: In Japan
- Ships: Worldwide
- Item Code: SGS30610
Flat $50 USD Shipping worldwide via DHL Express. Maximize your savings by ordering in bulk packs!
International Shipping Note
Please note that any local customs duties, taxes, or import fees are not included in the checkout price and must be borne by the customer.
How it works: Once your package arrives at your country's customs office, DHL will contact you directly via email, SMS, or phone to guide you through the local clearance and payment process.
DHL secure global delivery. Tracked from our door to yours. Kyotow.com Secured
Product Overview
The Kyocera SGS 1.0 SGS30575 is a solid-carbide 3-flute, square-end end mill from the Kyocera SGS non-ferrous milling program. The 1.0″ (25.4 mm) cutting diameter on a rigid 1" shank is purpose-built for grooving, profiling and pocketing in aluminum and other non-ferrous materials.
The 3-flute layout opens up deeper chip gullets than a 4-flute tool — the preferred geometry for gummy aluminum alloys — while the odd flute count naturally breaks up harmonic chatter. The uncoated, diamond-polished micro-grain carbide edges stay razor-sharp and resist built-up edge.
ISO Designation Breakdown
| Code Segment | Value | Meaning |
|---|---|---|
| Series Prefix | SGS | Kyocera SGS solid-carbide end mill series (305xx 3FL non-ferrous line) |
| Size Code | 30575 | Factory size identifier mapped to 1.0″ (25.4 mm) cutting diameter |
| Flute Count | 3FL | Three-flute layout — open gullets for aluminum, anti-chatter odd count |
| End Style | SQ | Square-end (flat-bottom) geometry for floors and 90° shoulders |
| Grade | Uncoated | Diamond-polished micro-grain carbide, no coating |
Engineering Dimensions & Geometry
| Parameter | Imperial | Metric | |
|---|---|---|---|
| Cutting Diameter (D) | 1.0" | 25.4 mm | |
| Diameter Tolerance | +0.0000 / −0.0005" | +0.000 / −0.013 mm | |
| Length of Cut (LOC) | 3.0" | 76.2 mm | |
| Shank Diameter | 1" | 25.4 mm | |
| Overall Length (OAL) | 4-1/4" (4.250") | 108.0 mm | |
| Number of Flutes | 3 | 3 | |
| Helix Angle | 30° | 30° | |
| Tip Geometry | Square end, center-cutting | Tip Geometry | Square end, center-cutting |
| Surface Finish | Diamond-polished flutes | Diamond-polished flutes |
Grade Details - Key Grade Characteristics
| Characteristic | Specification |
|---|---|
| Substrate | Ultra-fine micro-grain WC-Co carbide (0.4–0.6 µm grain size) |
| Coating | Uncoated, diamond-polished flutes (low-friction) |
| Substrate Hardness | ≈92.5 HRA (≈1,750 HV) |
| Edge Sharpness | Honed ≤5 µm edge preparation for free cutting |
| Transverse Rupture Strength | ≥3,800 MPa |
| Key Benefit | Sharp, anti-adhesion edge for aluminum, brass, copper & plastics |
Grade Comparison Matrix
| Attribute | Uncoated 3FL (this tool) | TiAlN Coated 4FL | General-Purpose Carbide |
|---|---|---|---|
| Chip Evacuation (Aluminum) | ★★★★★ | ★★★☆☆ | ★★★☆☆ |
| Edge Sharpness | ★★★★★ | ★★★★☆ | ★★★☆☆ |
| Heat Resistance | ★★★☆☆ | ★★★★★ | ★★★☆☆ |
| Aluminum / Non-Ferrous | Excellent | Good | Good |
| Steels & Stainless | Fair | Excellent | Fair |
| Relative Tool Life (in Al) | Baseline +20% | Baseline | 0.7× baseline |
Chipbreaker Profile
Chip control on this 3-flute tool comes from its flute and gash geometry:
- Extra-deep polished gullets — fewer flutes means more room per flute, so long aluminum chips evacuate before they pack or re-cut.
- 30° helix lifts chips smoothly out of the cut while keeping cutting forces low.
- Odd (3) flute count breaks up harmonic vibration for chatter-free finishes in thin-wall parts.
- Center-cutting gash allows plunging and ramping entries without a pilot hole.
Recommended Applications & Workpiece Materials
| Workpiece Material (ISO Class) | Suitability | Notes |
|---|---|---|
| ISO N — Aluminum & aluminum alloys | Excellent | Primary application — slotting, profiling, 3D work |
| ISO N — Brass, copper, bronze | Excellent | High-speed finishing |
| Plastics / Composites (Acrylic, PEEK, G10) | Excellent | Burr-free trimming & engraving |
| ISO P — Low-carbon steels | Good | Light finishing passes |
| ISO M — Stainless steels | Fair | Finishing only, flood coolant |
| ISO H — Hardened steels | Not recommended | Use TiAlN-coated variant |
Application Map by Operation
| Milling Operation | Suitability | Guideline |
|---|---|---|
| Full Slotting (Aluminum) | ★★★★★ | 3FL gullets clear chips at full 0.5×D (0.5") depth |
| Side Milling / Profiling | ★★★★★ | Radial WOC 5–15% of D for best finish |
| Pocketing | ★★★★☆ | Ramping entry at 3–5° |
| Thin-Wall Milling | ★★★★★ | Odd flute count minimizes chatter marks |
| Plunging | ★★★☆☆ | Center-cutting; peck in 0.5×D steps |
| 3D Contouring | ★★★☆☆ | Square end — use ball nose variant for 3D work |
Recommended Cutting Conditions
| Workpiece Material | Cutting Speed | Spindle Speed | Feed per Tooth | Feed Rate (3FL) |
|---|---|---|---|---|
| Aluminum / Aluminum Alloys | 400 SFM | 1,500 RPM | 0.0080"/tooth | 36.0 IPM |
| Brass / Copper / Bronze | 300 SFM | 1,100 RPM | 0.0080"/tooth | 26.4 IPM |
| Plastics / Composites | 400 SFM | 1,500 RPM | 0.0080"/tooth | 36.0 IPM |
| Mild / Low-Carbon Steel | 110 SFM | 400 RPM | 0.0080"/tooth | 9.6 IPM |
| Stainless Steel (304/316) | 75 SFM | 300 RPM | 0.0080"/tooth | 7.2 IPM |
Starting recommendations for rigid setups; adjust ±20% for machine stiffness and holder runout.
Operating Guidelines
- Keep tool-holder runout below 0.0004" (10 µm) TIR — runout is the leading cause of premature edge failure.
- Use the shortest possible gauge length for maximum rigidity.
- Climb mill whenever machine rigidity allows for better surface finish and tool life.
- In aluminum, use air blast or mist; avoid heavy flood coolant that thermally shocks the edge.
- Start at 70–80% of recommended feed and speed, then optimize upward in 10% steps.
- Retire the tool at the first sign of edge chipping or built-up edge.
Toolholder Compatibility
| Holder System | Specification | Notes |
|---|---|---|
| ER Collet Chuck | ER16 / ER20 collet, 1" bore | Best all-round choice for aluminum milling |
| Shrink-Fit Holder | 1" bore | ≤3 µm runout for finishing |
| Side-Lock (Weldon) End Mill Holder | 1" bore | Maximum grip for slotting |
| Hydraulic Chuck | 1" bore | Excellent vibration damping for fine finishes |
| Spindle Interface | BT40, CAT40, HSK-A63 or straight-shank adapters | Match to machine spindle |
Packaging & Ordering Information
| Item | Detail |
|---|---|
| Ordering Code (MPN) | SGS30575 |
| Unit of Sale | 1 piece (individually packaged in protective plastic tube) |
| Minimum Order Quantity | 1 piece |
| Country of Origin | Japan |
| Catalog Page Reference | Kyocera SGS Solid Carbide End Mill catalog, 305xx 3FL series |
| Warranty | Full manufacturer warranty against defects in material and workmanship |
Catalog Meta Data
| Field | Value |
|---|---|
| Product ID | 21448 |
| MPN / SKU | SGS30575 |
| Brand / Manufacturer | Kyocera (SGS) |
| Model | 1.0 ENDMILL 3FL SQ |
| Grade | Uncoated Micro-Grain Carbide |
| Net Weight | 0.1 kg |
| List Price | $369.10 USD |
| Availability | In stock |
✓ Genuine Kyocera Product
| Manufacturer | Kyocera Corporation |
|---|---|
| Status | Verified Original Product |
| Quality Assurance | Guaranteed Genuine Kyocera Components |
発送・在庫情報
We ship worldwide through our strategic global logistics network. Products are dispatched directly from our international distribution facilities to ensure efficient delivery and customs clearance.
-
Stock Enquiries (在庫確認):
Contact our logistics team at sales.kyotow@gmail.com for real-time inventory status and dispatch location information. -
In-Stock Items (在庫あり):
Normally dispatched within 3 business days from the nearest regional warehouse. -
Factory Procurement (取寄せ):
Manufacturing and dispatch typically require 4–5 weeks. Once production begins, cancellations cannot be accommodated. -
Authenticity Guarantee (本物保証):
All products sold by Kyotow are 100% genuine and sourced through authorized Japanese and international distribution channels.
正確な製品情報
Following the Japanese philosophy of Monozukuri (物の作り), we strive to maintain exceptional technical accuracy throughout our product catalog.
- Confirm dimensions, geometry, coating, and grade using the official Kyocera item code.
- Technical datasheets are available upon request.
- For technical clarification contact sales.kyotow@gmail.com.
返品・キャンセルポリシー
-
100% Accuracy Guarantee:
Full refund or replacement will be provided if the verified Kyocera item received differs from the official item code specified in your order confirmation. -
Order Finality:
Due to automated procurement systems connected directly to global factory distribution channels, orders cannot be modified or cancelled once processing has commenced. -
Technical Assistance:
Please verify machine compatibility, insert geometry, coating, and application grade before placing your order.
安全な決済方法
✓ Encrypted Transactions
✓ Global Buyer Protection
✓ Safe International Payments
All international payments are securely processed through PayPal, ensuring maximum transaction security and customer protection.
国際スピード郵便
✓ Full Shipment Tracking
✓ Global Logistics Network
✓ Flat Worldwide Shipping Rate: USD $50
Orders are shipped through our DHL Express corporate account from distribution facilities across Asia, Europe, and China for reliable international delivery.
Need Technical Assistance?
Contact our industrial tooling specialists for application support, tooling recommendations, datasheets, and compatibility verification.
sales.kyotow@gmail.comDirect Supply Chain Transparency サプライチェーンの透明性
Why are our prices so low? (価格が安い理由): Kyotow sources genuine Kyocera tools directly from domestic Japanese distribution networks, completely bypassing the steep regional markups, localized sales overhead, and heavy middleman margins of Western distributors. We pass 100% of those structural savings directly to your machine shop.
Kyotowは日本の国内流通ネットワークから京セラ正規品を直接仕入れることで、欧米の現地代理店による大幅な上乗せ価格や営業コスト、中間マージンを完全に排除しています。その構造的メリットを、お客様の加工現場へ100%還元いたします。
Domestic Sourced
Procured straight from Japan's local wholesale networks to capture maximum market arbitrage.
100% Genuine
Zero counterfeit risk. All items are brand-new, authentic factory-sealed Japanese stock.
No Regional Markups
We bypass Western corporate sales teams and localized regional overhead costs entirely.
